12V 24V 48V 60A MPPT Solar Charge For LiFePO4/Lithium/Lead Acid/Gel Battery

 

12V 24V 48V 60A MPPT Solar Charge Controller WiFi 150VDC Solar Panel Regulator For LiFePO4/Lithium/Lead Acid/Gel Battery

 

Basic functions:

Innovative maximum power point tracking technology, which can significantly improve the energy utilization rate of the solar system, and the conversion efficiency is as high as 97%;

Quickly scan the entire I-V curve, and efficiently track the maximum power point;

Three types of lead-acid batteries, sealed, colloidal, and open type, and lithium battery series charging programs are optional;

With automatic protection functions for overcharge, overdischarge, overload and short circuit;

RS485 communication interface, multi-machine communication is possible, and it is convenient to view the operating parameters of the controller;

 

MPPT controller features:

This controller is used in solar off-grid power generation system to automatically adjust battery charging and discharging. It has an advanced tracking algorithm to obtain the maximum power of the solar cell components and charge the battery; at the same time, its low voltage disconnect (LVD) function can prevent the battery from over-discharging and causing damage.

The battery charging process of the MPPT controller is optimized to extend battery life and improve system performance. Its comprehensive self-test function and electronic protection function can avoid damage caused by installation errors and system failures. Although the controller is easy to operate and use, in order to allow you to better use all the functions of the controller and improve your photovoltaic system, please read the instructions and instructions in this manual carefully.

 

1. 12v-48v automatic identification.

2. Lithium battery activation function.

3. compatible with lead-acid, colloid, ithium iron phosphate, ternary lithium battery charging.

4. number of lithium battery strings can be adjusted.

5. User defined charge and discharge voltage, adjustable .

6. Photovoltaic charging current adjustable.

7. maximum support 150V photovoltaic input voltage.

8. Touch screen operating system.

9. support RS485 communication.

10. with DC output, street lamp charging function.

11. with battery temperature compensation function.

12. It has various protection functions.

13. can switch between Chinese and English

Product parameters

 

 

Model		40A	60A	80A	100A	40A-96V	60A-96V	80A-96V	100A-96V
Battery Voltage		12V/24V/36V/48V(Auto Match)				96V
Rate Current		40A	60A	80A	100A	40A	60A	80A	100A
Charging Mode		MPPT
Battery Type
Charging method		Three stages: constant current, constant voltage, floating charge
Max Input PV voltage（VOC）		DC150V(low temperature) DC138V（25℃standard temperature）				DC250V(low temperature) DC230V（standard temperature）
Start Time		≤10s
Dynamic response recovery time		≤500us
Static power		≤4W		≤8W		≤4W		≤8W
tracking efficiency		≥99.5%
Maximum conversion efficiency		≥98%
operating voltage range		8～64V				72～128V
Maximum power point operating voltage range	12system	20～150VDC				(96Vsystem)128～250VDC
	24Vsystem	36～150VDC
	36Vsystem	48～150VDC
	48Vsystem	64～150VDC
Rate Charging Power	12V	540W	800W	1040W	1300W
	24V	1080W	1600W	2080W	2600W
	36V	1620W	2400W	3120W	3900W
	48V	2160W	3200W	4160W	5200W
	96V					4160W	6240W	8320W	10400W
DC load voltage		Can be used directly under 12V/24V working voltage				/	/	/	/
Rate DC load current		40A				/	/	/	/
Load control method		Normally ON/OFF mode /time control mode/light control mode				/
Load undervoltage protection		Default 10.5V*N (N is the number of batteries) adjustable parameters				/
Cooling method		air cooling
Display method		HD LCD backlit display
Protective function		Input and output over-voltage protection, input and output anti-reverse connection protection, machine over-temperature protection, load over-current protection
temperature compensation coefficient		一3mV/℃/2V
communication method		RS485( please buy it seperately)
Working temperature		-20℃～+50℃
Storage temperature		-40℃～+70℃
noise		≤50dB
humidity		0～90%RH
Altitude		0～3000M
Body size (mm)		219*260*110		275*348*109		219*260*110		275*348*109
Net weight (KG)		2.8KG		4.6KG	5.2KG	2.8KG		4.6KG	5.2KG
Recommended wiring		7AWG/0.39″²	6AWG/0.62″²	4AWG/0.98″²	2AWG/1.37″²	7AWG/0.39″²	6AWG/0.62″²	4AWG/0.98″²	2AWG/1.37″²

About WiFi Modules